PVD Coating Process Classification And Introduction

May 05, 2022|

PVD coating process classification and introduction

PVD coating processes are generally divided into three categories, namely, Vacuum Evaporation, Sputtering, and Ion Plating.

1. Vacuum Evaporation
When metals are heated in a vacuum, they turn into gases and evaporate. Vacuum evaporation uses this principle. Most of the treatment is carried out in a vacuum below 10-5TORR. Metals and all kinds of compounds can be used as attached substances. The application cases include lenses, mirrors, plastic parts, and so on. However, the purpose of metal surface hardening is very few, mainly used for decorative objects.

2. Sputtering coating (Sputtering)
This principle is based on the target as the cathode, the substrate as the anode, in the Ar atmosphere of 10-2TORr with high voltage near the cathode after the Ar gas ionization into Ar+, and impact with the cathode. Molecules or atoms thrown out by Ar+ ions collide with the substrate and pile up to form a thin film.
The sputtering application range is very wide, the use of the function of the film is abrasion resistance, corrosion resistance, heat resistance, antistatic or decorative for the purpose, but because of the problem of adhesion is rare in the application of tools. Suitable for bulk continuous coating, such as mobile phone parts.

3. Ion Plating (Ion Plating)
The best effect of PVD coating process is ion coating. This method is a technology that uses arc to impact the target so that the target atoms are excited and react with reactive gas to form compounds deposited on the surface of the workpiece. After running to a high vacuum in the furnace, inert gas is introduced and bias is added to cause argon ion (Ar+) and negatively charged electron (E -). Positively charged argon-ion will collide into the substrate with a negative bias to clean the surface of parts; After that, the reaction gas is introduced to generate a plasma between the target and the substrate for coating operation. This method has fast film-forming speed and better compactness and is mainly used for coating cutting tools.
Most companies use the most advanced cathode Arc method for coating operations. Compared with other methods, this method has more ionization rate, uniform adhesion, and the best density, mostly used in metal hard coating, especially the requirements of wear resistance objects.

604

IKS PVD company, decorative coating machine, tools coating machine, DLC coating machine, optical coating machine, PVD vacuum coating line, the turn-key project is available. Contact us now, E-mail: iks.pvd@foxmail.com


Send Inquiry