Superiority Of The Coated Tools

Nov 02, 2021|

Superiority of the coated tools
In the good toughness of the tool (blade) substrate surface coating, coated with high hardness, high wear resistance, a high-temperature resistant material thin layer (such as TiN, TiC, etc.), so that the tool (blade) has a comprehensive, good comprehensive performance. The hardness of uncoated HSS is only 62~68HRC (760~960HV), and that of cemented carbide is only 89~ 93.5hRa (1300~1850HV). The surface hardness after coating can reach 2000~3000HV.
Because the surface coating material has very high hardness and wears resistance and high-temperature resistance. Therefore, compared with uncoated cutting tools (blades), coated cutting tools allow higher cutting speed, thus improving the cutting efficiency; Or at the same cutting speed, improve tool life.
② Because the friction coefficient between the coated material and the processed material is small, so the cutting force of the coated tool (blade) is less than that of the uncoated tool (blade).
(3) With coating tool (blade) processing, the machined surface quality of parts is better.
④ Because of the good comprehensive performance of coated cutting tools (blades), coated carbide blades have good versatility, a coated carbide blade has a wide range of use.

cutting blade coating machine

IKS PVD company, decorative coating machine, tools coating machine, optical coating machine, PVD vacuum coating line, the turn-key project is available. Contact us now, E-mail: iks.pvd@foxmail.com


Send Inquiry