PVD Coating Machine For Car Engine Parts
This PVD Coating machine is used for broach tools and molds. Broach knives are slender, slightly tapered cutting tools used to remove material and perform precision finishing on the inner surface of round or non-round holes in engineered parts in the automotive and other industries. These tools come in a surprisingly wide range of sizes, up to 0.5 m in diameter and 2.5 m in length. The broach is a manufactured piece of high-speed steel (HSS) or tungsten carbide(WC). To extend the service life of these expensive industrial tools, the most advanced technology is the use of hard coatings to protect them.
- Product Introduction
IKS PVD Technology (Shenyang) Co., Ltd. is one of the most reliable manufacturers and suppliers of pvd coating machine for car engine parts in China, featured by quality products and low price. If you're going to wholesale cheap pvd coating machine for car engine parts made in China, welcome to get quotation from our factory.
ZY1822 coating machine is independent research and development of super-hard coating ion coating machine by IKS, using unique new arc source coating technology, IET etching system was used to optimize the coating adhesion. to ensure the coating thickness and coating uniformity, At the same time, the application of new technology improves the coating effect and saves the operating cost.
Tool coating inspection index:
The thickness of the tool coating, adhesion, and Vickers's hardness value are used as testing standards in tool coating detection. The measurement results of relevant coating data on the surface of the test block are compared, and the average value is selected for recording.
1, Thickness: The concave points on the surface of the test block were grinding by the ball mill meter, and the thickness of the coating was obtained by calculating the formula data.
2, Adhesion: Using the Rockwell hardness tester, select the appropriate load, and grind on the surface of the test block to get a dot, according to the grain around the pressure point and the breakdown situation to divide the adhesion grade.
3, Vickers hardness: Using The ickers hardness tester, select the appropriate load, on the surface of the test block presspoint, through the compression diagonal size formula conversion, to get the Vickers hardness value.
Hot Tags: pvd coating machine for car engine parts, China, manufacturers, suppliers, buy, customized, made in China, ZY 2236 horizontal cathodic arc coating equipment, ZY 0805 Experimental Vacuum Coating Machine, PVD multi arc coating machine, ITO Highlight through and conductive glass coating line, drills vacuum coating machine, Vacuum Coating System
