Secondary electron emission: the important factors which influence the stability of discharge ion bombardment of target
Aug 31, 2026| Secondary electron emission: the important factors which influence the stability of discharge ion bombardment of target, in addition to produce sputtering particles, can also trigger "secondary electron emission" phenomenon, namely the target material surface under the effect of ion collisions, the atom in its outer electrons gain enough energy from the atom, a free electron (secondary electron). The generation of secondary electrons has a significant impact on the discharge process of sputtering coating: on the one hand, secondary electrons collide with gas molecules under the acceleration of the electric field, which can maintain the stable progress of glow discharge and ensure the continuous output of the ion source; On the other hand, excessive secondary electrons can lead to the accumulation of surface charges on the target material, triggering the "target material charging" phenomenon, interfering with the movement trajectory of ions, and even causing defects in the film layer (such as pinholes and peeling). Secondary electron emission coefficient (unit of incident ions on the number of secondary electron) and ion energy, material and surface state of target. Generally speaking, the higher the ion energy, the greater the secondary electron emission coefficient. The secondary electron emission coefficient of metallic target materials is usually higher than that of insulating target materials (because insulating target materials tend to accumulate charges and suppress electron escape). Oxidation or contamination on the surface of the target material will increase the secondary electron emission coefficient (the electron work function of oxides is relatively low). In practical applications, to control the generation of secondary electrons, it can be achieved by adjusting the bias voltage of the target material (applying a negative bias voltage to suppress electron escape), optimizing the parameters of the ion source, or coating the surface of the target material with a coating of a low secondary electron emission coefficient (such as silicon carbide).
IKS PVD company, decorative coating machine, tools coating machine, DLC coating machine, optical coating machine, PVD vacuum coating line, the turn-key project is available. Contact us now, E-mail: iks.pvd@foxmail.com


