the evaporation of alloying elements can be prevented as long as the vacuum degree is suitable.

Dec 09, 2022|

 the evaporation of alloying elements can be prevented as long as the vacuum degree is suitable.

However, many defects can be avoided if the right choices are made. For example, Cr12MoV cold stamping die steel was insulated for 90min at 1050℃ with a vacuum of 1.33Pa. The distribution of chromium in the range of 150μm from the surface was determined by an X-ray microanalyzer, and no de-chromium was found. This is because, at 1.33Pa, the theoretical evaporation temperature of chromium is 1205℃, while at 1050℃, the corresponding vapor pressure is low, about 0.0133Pa, that is, the vapor pressure is lower than the external pressure, so there is no evaporation. The example shows that the evaporation of alloying elements can be prevented as long as the vacuum degree is suitable.

DLC on sewing machine parts

IKS PVD company, decorative coating machine, tools coating machine, DLC coating machine, optical coating machine, PVD vacuum coating line, the turn-key project is available. Contact us now, E-mail: iks.pvd@foxmail.com


Send Inquiry