Anti-caking Of PVD Coating
Sep 13, 2021| Anti-caking of PVD coating
The adhesive resistance of the coating can prevent or mitigate the chemical reaction between the tool and the material to be processed, and avoid the deposition of workpiece material on the tool.
In the processing of non-ferrous metals (such as aluminum, brass, etc.), there is often a chip on the tool (BUE), resulting in tool breakage or workpiece size out of tolerance. Once the material being processed begins to adhere to the tool, the adhesion will continue to expand.
When the aluminum workpiece is processed by forming a tap, the aluminum on the tap will increase after each hole is processed, and finally, the diameter of the tap becomes too large, resulting in a scrap of the workpiece size out of tolerance. Coatings with good adhesion resistance can work well even in machining applications where coolant properties are poor or concentration is insufficient.

IKS PVD company, decorative coating machine, tools coating machine, optical coating machine, PVD vacuum coating line, the turn-key project is available. Contact us now, E-mail: iks.pvd@foxmail.com


