Deposition Characteristics Of Elemental Target And Alloy Target
Sep 02, 2024| Deposition characteristics of elemental target and alloy target
(Cr,Ti,Al) N quaternary coatings can be prepared either by co-sputtering of multiple elemental targets or by direct sputtering of multicomponent alloy targets. The advantage of multiple elemental targets deposited (Cr,Ti,Al) N coatings by co-sputtering is that each target is independent of each other, and the content of Cr,Ti and Al metal elements in the coatings can be independently controlled by the target current or target power [21], thereby obtaining (Cr,Ti,Al) N coatings of different composition proportions [53]. It has obvious advantages in the preparation of multilayer film and mixed film. The disadvantages of this method are that there are many adjustable parameters, multi-target recycling leads to uneven coating composition, and the stoichiometric ratio of elements in (Cr,Ti,Al) N coating cannot be accurately controlled [54]. By using alloy target deposition (Cr,Ti,Al) N quaternary coating, the parameter control is relatively simple, and the composition ratio of the coating is generally close to that of the alloy target used [55], so it is easier to obtain the (Cr,Ti,Al) N quaternary coating with uniform composition. However, due to the different sputtering yields of each element constituting the alloy target during the sputtering process, there is a problem of selecting sputtering of different elements, so the composition ratio of the coating is still different from that of the alloy target [56]. At present, in the study of the preparation of (Cr,Ti,Al) N quaternary coatings by magnetron sputtering, the more common alloy targets are AlTi target and AlCr target.
IKS PVD company, decorative coating machine, tools coating machine, DLC coating machine, optical coating machine, PVD vacuum coating line, the turn-key project is available. Contact us now, E-mail: iks.pvd@foxmail.com


