Hardness testing of metal materials

May 07, 2021|

Hardness testing of metal materials

Hardness is the ability of a material to resist local deformation, especially plastic deformation, indentation, or scratches. It is a measure of the softness and hardness of materials.
Hardness is divided into three types according to the different testing methods.
(1) scratch hardness. It is mainly used to compare the hardness and softenness of different minerals. The method is to select a stick with one end hard and one end soft. The measured material will be scratched along the stick, and the hardness and softenness of the measured material will be determined according to the position of the scratch. Qualitatively, hard objects make long scratches, soft objects make short scratches.
② Pressing hardness. It is mainly used for metal materials. The method is to press the specified head into the tested material with a certain load, and compare the hardness of the tested material with the size of the local plastic deformation on the surface of the material. Due to the differences in the indentation head, load and load duration, there are many kinds of indentation hardness, mainly Brinell hardness, Rockwell hardness, Vickers hardness and micro-hardness.
(3) rebound hardness. Mainly used for metal materials, the method is to make a special small hammer from a certain height free fall impact on the sample of the material to be measured, and the amount of strain energy stored (and then released) in the process of impact of the sample (determined by the bounce height of the small hammer) to determine the hardness of the material.

IKS PVD company, decorative coating machine, tools coating machine, optical coating machine, PVD vacuum coating line, the turn-key project is available. Contact us now, E-mail: iks.pvd@foxmail.com

2016070817104494

Send Inquiry