Keep the vacuum system clean and adequately degassed
Nov 10, 2021| Keep the vacuum system clean and adequately degassed
To achieve the highest vacuum, the total gas load must be as low as possible. Therefore, under high and ultra-high vacuum conditions, the system vent rate needs to be as low as possible (many of the rules of cavity design, such as minimizing internal surface area, are designed to reduce the system vent rate).
Degassing is the slow release of dissolved, adsorbed, or intermingled gases in a material in a vacuum environment. Water, oil, sealants, lubricants, and adhesives are the most common sources of degassing, and even solids such as metal and glass can release gases from the surface or interior of the material under a vacuum. Polishing, cleaning, or baking surfaces that may be exposed to high and ultra-high vacuum environments can effectively reduce the system's vent rate, thus greatly reducing the time required to reach the target pressure.
Dry nitrogen or air should be used when the high vacuum or ultra-high vacuum system needs to break, and the exposure time in the air should be minimized; When the system is not used for a long time, it is best to store it in a vacuum.

IKS PVD company, decorative coating machine, tools coating machine, optical coating machine, PVD vacuum coating line, the turn-key project is available. Contact us now, E-mail: iks.pvd@foxmail.com


