oil diffusion pump
May 12, 2022| oil diffusion pump
An oil diffusion pump is a vacuum pump with low pressure, high speed, and directional flow of oil vapor jet. The ultimate vacuum of this pump is 10-4 ~ 10-5 pa, the working pressure range is 10-1 ~ 10-4 pa, and the pumping speed range is tens to hundreds of thousands of liters/second (1 liter = 10-3.3 meters). The oil diffusion pump is the main equipment to obtain high vacuum, widely used in vacuum smelting, vacuum coating, space simulation test, and some vacuum systems not sensitive to oil pollution.
In 1915, German physicist W. Gad published his report on the diffusion pump. In 1916, American I. Langmuir made the so-called condensate pump with a cooling system on the pump wall. These pumps use mercury vapor as the operating medium to obtain a 10-5 pa vacuum. In 1928, The Englishman C.D. Birch discovered petroleum derivatives with high boiling points. 1936, C.D. Hickman and others made synthetic oils. Both oils have very low saturated vapor pressure at room temperature, displacing mercury as the working fluid of the diffusion pump. Since then, the oil diffusion pump has been widely used in industrial production and scientific experiments in the field of high vacuum and laid the foundation of high vacuum technology. In the 1960s, the oil diffusion pump has a new development.
The main improvements are:
The material of the pump is stainless steel with a very small gas discharge.
② The oil with low saturated vapor pressure and good thermal stability, such as polyphenyl ether and silicone oil, is used as the working fluid of the pump.
③ Reform the structure, the new oil diffusion pump in the pump flange is unchanged and does not excessively increase the size of the pump under the condition of protruding in the lower flange to expand the section of the pump chamber, the pumping rate can be increased by 20 ~ 40%. Such as the installation of a large diameter diffusion nozzle and liquid nitrogen cooling large diameter oil cap. The pump can have the pumping rate of the usual pump (refers to the pump without expanding the cross-section of the pump chamber), and more thoroughly overcome the pump oil return to obtain below 10-8 pa clean ultra-high altitude. Therefore, the oil diffusion pump in the cleaning of ultra-high vacuum industrial production and the scientific test has achieved an important position.

IKS PVD company, decorative coating machine, tools coating machine, DLC coating machine, optical coating machine, PVD vacuum coating line, the turn-key project is available. Contact us now, E-mail: iks.pvd@foxmail.com


