Vacuum pump oil performance characteristics
May 10, 2022| Vacuum pump oil performance characteristics
Vacuum pump oil is a special lubricating oil for vacuum obtaining equipment. It is one of the important materials of vacuum pumps, the quality of oil directly affects the ultimate pressure, pumping rate, back pressure, and oil return rate of the equipment. In the vacuum pump, the vacuum pump oil is not only used as a medium to obtain vacuum, but also plays a role in lubricating, cooling, and sealing mechanical friction points. According to the working condition of oil products in the use process, vacuum pump oil can be divided into mechanical vacuum pump oil, steam injection pump oil, vacuum sealing oil, and so on. Vacuum pump oil performance requirements :(1) very low vapor pressure this is the most important performance of vacuum pump oil. Because vacuum pump vacuum degree to 0.000133Pa below, vacuum pump oil evaporation is very low. General vacuum pump oils are paraffin-based narrow distillate lubricants. For diffusion vacuum pumps, silicone oil or other synthetic oils with very low vapor pressure can also be used. The saturated vapor pressure is lower than the limit pressure indicated on the pump nameplate. (2) Viscosity and viscosity-temperature characteristics The vacuum pump chamber content is constantly changing to form the exhaust effect, the lubricating oil should have the appropriate viscosity and viscosity-temperature characteristics. (3) Thermal oxidation stability vacuum pump to high-speed development, due to the high-speed friction of the vane and the pump body oil temperature rise, oil is easy to oxidation decomposition, especially the diffusion pump is often in a very high-temperature environment to work so that the vapor pressure in the system increases, the vacuum degree is reduced. Therefore, vacuum pump oil is required to have good thermal oxidation stability. (4) Anti-corrosive vacuum pump suction if it is corrosive gas, will react with oil corrosion pump parts. On the other hand, the air inhaled often contains water vapor condensate, which will cause the emulsification of vacuum pump oil and make metal corrosion. Therefore, the oil is required to have good corrosion resistance and demulsification. (5) In the operation process of the anti-emulsification vacuum pump, the water and cold air in the system will be discharged into the pump oil, and the oil and water will form an emulsion, which not only affects the service life of the pump oil

IKS PVD company, decorative coating machine, tools coating machine, DLC coating machine, optical coating machine, PVD vacuum coating line, the turn-key project is available. Contact us now, E-mail: iks.pvd@foxmail.com


